JVC HR-DVS2EU Instructions Manual page 61

Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver's connector if you
have a decoder, AV1 (L-1) IN/OUT connector to TV's connector,
and AV2 (L-2) IN/DECODER connector to the satellite receiver's
connector. Then connect the satellite receiver and TV.
Back of TV
EXT.1
Aerial
connector
21-pin AV input
connector (SCART)
TV Aerial
cable
ANT. IN
ANT. OUT
EXT.2
AV1 (L-1) IN/OUT ENTREE/SORTIE
ANTENNA
ANTENNE
IN
ENTREE
IN/DECODER
AV2 (L-2)
OUT
ENTREE/DECODEUR
SORTIE
NOTES:
Set "L-2 SELECT" to "A/V". (
To record a programme via the satellite receiver, select L-2
mode by pressing NUMBER keys and/or PR so that
"L-2" appears on the display panel.
To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
For details, refer to the instruction manual for the satellite
receiver and decoder.
Aerial
Outdoor Unit
Satellite Cable
OUT
S
SORTIE
(DV/VHS)
AUDIO
(DV/VHS)
L
OUT
SAT CONTROL
SORTIE
CONTROLEUR SAT
R
pg. 58)
Satellite Receiver Unit
TV VCR DECODER
Decoder
Back of Recorder
61
EN
Mains outlet