JVC HR-DVS2EU Instructions Manual page 25

Soundtrack Selection (DV Deck)
The DV recording deck is capable of recording two soundtracks (L and R) and will play back the one you select.
During Playback
Pressing AUDIO on the remote control changes the soundtrack being played back as follows:
TRACK
On-Screen Display
L R For stereo or Bilingual tapes
L For main audio of Bilingual tapes
R For sub audio of Bilingual tapes
Sound Mode Selection (DV Deck)
1
2
Press MENU to access the Main Menu screen.
Move the highlight bar (pointer) to "DV MODE SET" by pressing % fi, then press OK or
3
Move the highlight bar (pointer) to "SOUND MODE" by pressing % fi, then press OK or
4
select "12BIT" or "16BIT".
Press MENU to return to the normal screen.
NOTE:
Set "SOUND MODE" to "12BIT" at the original recording on a Mini DV tape, if you wish to
perform Audio Dubbing later.
12BIT Mode Setting (Audio-dubbed Mini DV Tape)
1
2 Press MENU to access the Main Menu screen.
Move the highlight bar (pointer) to "DV MODE SET" by pressing % fi, then press OK or
3
Move the highlight bar (pointer) to "12BIT MODE" by pressing % fi, then press OK or
4
"SOUND1", "SOUND2" or "FULL SOUND".
Press MENU to return to the normal screen.
12BIT MODE
SOUND1
SOUND2
FULL SOUND
NOTES:
When "12BIT MODE" is set to "FULL SOUND":
For bilingual tapes, both the main and sub audio will be audible.
To select just the main audio or just the sub audio of Bilingual tapes, set "12BIT MODE" to "SOUND1".
USE
SOUND YOU HEAR
Original recorded sound
Audio-dubbed sound
Original recorded sound and
Audio-dubbed sound
DV MODE SET
#
.
# SOUND MODE
to
12BIT MODE
AUDIO REC
[5∞] =
[MENU] : EXIT
DV MODE SET
#
.
# SOUND MODE
to select
12BIT MODE
AUDIO REC
[5∞] =
[MENU] : EXIT
25
EN
12BIT
SOUND1
NICAM
12BIT
SOUND1
NICAM