Insert Editing - JVC HR-S10EG Service Manual

INSERT EDITING
Connections
To insert video and audio signals from a camera, connect
a camera to the recorder's CAMERA/KAMERA con-
nector. See illustration on page 23.
To insert video and audio signals from another video re-
corder, connect the video and audio output connectors of
the second video recorder to the VIDEO IN/VIDEO EIN-
GANG connector and AUDIO socket of the tuner. See
illustration on page 26.
Note:
@ In the configuration using the tuner, start editing
after the playback picture from the second recorder
reaches its "clean" condition.
Hh switch on the TV receiver.
®@ Adjust the TV receiver's channel to the video chan-
nel.
Press POWER/BETRIEB.
Load a pre-recorded cassette.
3 Set INPUT SELECT/EINGANGS-WAHL as required.
AUX: To insert programmes from a different tape.
TV: To insert a TV programme from the tuner,
ga
Play back the tape to determine the edit-out point (the
end of the tape section to be replaced).
G Press PAUSE at the edit-out point.
Press RESET/RUCKST.
@ The tape counter will be reset to "0".
E] Press the MEMORY button to obtain ''M" in the dis-
play.
—22-