JVC HR-DVS2EU Instructions Manual page 30

30
EN
1
AUDIO
2
1
4
7
0000
1
2
– –:– –
2 3
5 6
3
8 9
4
4
MENU
0
OK
3
RECORDING (cont.)
Super VHS ET (S-VHS ET)
— Recording on VHS cas-
settes with S-VHS quality
(VHS Deck Only)
You can record in SP mode on VHS tapes with S-VHS picture
quality. Tapes recorded using this function can be played back on
a recorder equipped with the S-VHS ET function.
You can activate the S-VHS ET function only before you start
recording on a VHS cassette.
Before recording, make sure that "B.E.S.T." is set to "ON".
( pg. 32)
ENGAGE S-VHS ET MODE
1
Press S-VHS ET on the recorder. You can check the
current setting ("S-VHS ET : ON" or "S-VHS ET : OFF") if
"O.S.D." is set to "ON" (
appears on the TV screen, press S-VHS ET again in
about 5 seconds to set it to "ON".
The S-VHS indicator lights up on the front display
panel.
NOTES:
You cannot activate the S-VHS ET function ...
... while recording is in progress.
... while timer-recording or Instant Timer Recording
( pg. 28) is in progress.
... while B.E.S.T. ( pg. 32) is in progress.
S-VHS ET function does not work ...
... with S-VHS cassettes.
... with recordings in LP/EP mode.
To keep the highest quality recording and playback pictures
over a long period of time, S-VHS recording on S-VHS
cassettes is recommended.
Use of high grade tapes is essential for S-VHS ET recordings.
On some tapes, picture quality will not improve even if the
S-VHS ET function is used. Check the recording quality before
you start important recordings.
You can play back a tape recorded using the S-VHS ET
function on most of S-VHS recorders and of VHS recorders
equipped with SQPB (S-VHS QUASI PLAYBACK) function.
(Notice some recorders are not compatible with the S-VHS ET
function.)
While playing back a tape recorded using the S-VHS ET
function on some recorders, noise may appear. (If playback
picture becomes blurred or interrupted, use a cleaning
cassette.)
In the high-speed search, still, slow motion or frame-by-frame
playback modes ( pg. 19, 20), noise may appear. If these
modes are performed frequently on a tape recorded with the
S-VHS ET function, the tape may be damaged and the picture
may be deteriorated.
pg. 11). If "S-VHS ET : OFF"