Low Battery - Lockly LATCH EDITION SECURE PLUS User Manual

2.7 Low Battery

When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition
to the flashing low battery icon on the touch screen. You should replace batteries immediately to
avoid your smart lock from shutting down.
When your smart lock low-battery warning alert finally dies, you will have 3 chances to unlock your smart
lock either by a password, APP or fingerprint. If the unlock was successful, the low-battery warning alert
will be on for 1 minute. After which, the smart lock will go to dead-battery mode and will lock auto lock
in 5 seconds and the screen will display a low-battery icon.
Condition
Low Battery
Dead Battery
SECTION 2.7
Indicator
Battery Icon on the display
keypad will light up to indicate
low battery.
When there is no display
and sounds; and screen is
non-functional.
9V Battery
Replace batteries immediately to
avoid battery failure. Lockly Secure
can still operate up to 300 cycles
in low battery condition.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the door.
Alternatively, use a 9V battery as
shown below to temporarily
activate the lock.
Your Lockly will automatically detect battery polarity.
So hold your 9V battery lead in place against bottom
of the Lockly to temporarily activate the screen to
enter your Access Code. Be sure to hold the 9V
battery against the contact points located at the
bottom of the lock until you have successfully unlocked
your door with your Access Code. Once unlocked,
batteries should be replaced immediately.
Solution
7