Lockly LATCH EDITION SECURE PLUS User Manual page 23

4.7 Disabling Safe Mode
There are four (4) ways to disable Safe Mode.
Option 1 - Entering Correct Access Code
Activate the keypad by pressing and holding
Enter the correct Access Code twice (2) when the keypad is available, pressing
the Access Code is entered.
Option 2 - Lockly Bluetooth App
Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door. If you have not
downloaded the app to use with your smart lock, you won't be able to use this option to disable Safe
Mode.
Option 3 - Physical Key
There is a pair of keys included with your new lock. You may use the keys to manually unlock the door.
To learn how to use your physical keys, see Section 4.5.
Option 4 - Registered Fingerprint
Use any registered fingerprint to reactivate the keypad. The door will unlock and reactivate the keypad
once a registered fingerprint is used.
Option 5 - Registered RFID card
Use any registered RFID card to reactivate the keypad. The door will unlock and reactivate the keypad
once a registered RFID card is used.
While in Safe Mode, the keypad will not be lit up when you are using your Physical Key.
To reactive the screen, use the Keypad Display Switch by toggling it OFF and ON.
SECTION 4.7
for 3 seconds.
after every time
21