Installation overview Using Video Doorbell We are here to help! Unlock with Apple Home Keys Getting to know your Lockly Vision Unlock with digital keypad Setup New-Gen Vision Connect Hub Unlock with your finger Install battery & setup with app...
Download the Lockly app Scan or visit Lockly.com/app This app will guide you through the installation setup process of your Lockly smart lock. Create your profi le for a more tailored experience and optimised device performance and battery life.
Scan for easy installation step-by-step video guide Watch our step-by-step video guide for easy installation and setup. We will guide you through each step making it a breeze. Installation guide included in the package. Check support.Lockly.com for the most updated version.
We are here to help! Your Lockly smart lock comes with Lifetime technical support. Feel free to contact us with any questions or comments. (669) 500-8835 help@Lockly.com support.Lockly.com...
Getting to know your Lockly Vision 2K Video Doorbell with Camera 2-way audio PIN Genie digital keypad Apple Home Key sensor Wake up screen / OK button Wi-Fi status Powered by Physical key hole Unlocked indicator / Welcome Mode Safe Mode...
Page 8
Activation Card LOCK SERIAL 1 2 3 4 5678 PGKxxxxxxxxxxxxxxxxxxxxxx ACTIVATION CODE PGKxxxxxxxxxxxxxxxxxxxxxx Need help? Email: help@Lockly.com | Support: +1(669) 500-8835 1 2 3 4 Have your activation card Vision Zeno Series Deadbolt Edition 5678 PGKXXXXXXX handy for set up...
Setup New-Gen Vision Connect Hub Connect the hub to power. Follow the in-app instructions to complete the setup. Reset TF Card (already inserted) Power adapter cable LED status light For the best Wi-Fi connection: • Avoid placing the device in kitchens to prevent signal disruptions from appliances.
After the lock has been powered on for 10 minutes, the Bluetooth connection will be disabled and you cannot pair the lock with the Lockly app or Home app. To re-enter Pairing Mode, either reinstall the battery or press the Program button. Reactivating...
System requirements Sharing access with others and controlling the Lockly Vision away from home through Apple Home requires an Apple TV® (4th generation tvOS 12.0 or higher), an iPad® (iOS 12.0 or higher), a HomePod® or HomePod mini® setup as...
Fingerprint scanning To achieve consistent and quick fi ngerprint recognition, it’s crucial to understand the correct procedure for registering fi ngerprints. Place your fi ngertip fl at on the sensor. Ensure it is centered. Avoid Misalignment: Height: Avoid positioning your fi nger too high or too low on the sensor.
Adding a Fingerprint Select your lock from the Lockly app. Go to the ‘Access tab’ and follow on-screen instructions. STEP 1 - Fingerprint Scanning • The sensor will scan each fi nger- print multiple times, as shown by the countdown on the screen.
The PIN Genie Keypad Our hack proof, exclusive PIN Genie™ dynamic shuffl ing technology shuffl es access codes after each use. You can also toggle to a fi xed keypad, refer to the Lockly app for more information.
Using the PIN Genie Keypad STEP 1 1 2 3 4 5 6 Press the one of the four buttons that Default access code contain the digits of your access code. Sometimes the same digit will appear in two buttons, tab either button.
1 2 3 4 5 During set up, you are required to set a new access code to replace the default access code. You can set up via the Lockly app the valid period of your access codes - permanent, recurring or one-time use.
Tap notifi cation to open camera view in the Lockly app. STEP 4 Unlocked or initiate two-way conversation within the video view. You can record the call in the Lockly app. Live view of the camera can also be activated from the Lockly app.
Unlock with Apple Home Keys STEP 1 Add a home key to Apple Wallet with the Home app on your iPhone or Apple Watch. Refer to page 11 for details. STEP 2 Turn on Express Mode in the Wallet app. STEP 3 Place your device near the icon...
Press the OK button. Powered by Ten consecutive wrong attempts will put Lockly into “Safe Mode”. Refer to support.Lockly.com for details. Temporarily boost the brightness of the keypad by pressing and holding any of the 4 buttons for 3 seconds.
Unlock with your fi nger Place a registered fi nger fl at and centered on the fi ngerprint sensor. Powered by Green LED with a ‘beep’ sound. Door is unlocked. Red Light with two 'beep' sounds. Finger is not recognized. Try again or use another registered fi...
Set up auto-lock when you close your door in the Lockly app. Thumbturn Rotate the thumbturn on the interior assembly. Physical Key Insert physical key and rotate. When the Lockly smart lock is unlocked, the unlocked icon will display on the screen.
More ways to access and control Lockly smart lock offers a wide range of secured ways to access and grant access to your property. Refer to the Lockly app to learn more or visit support.Lockly.com. eKeys & eBadges Voice Control...
Alerts and Sounds Exterior Assembly Alerts Fingerptint Exterior LED indicator fl ashes green with a ‘beep’ Door unlocked sound Exterior LED indicator fl ashes red with two 'beep' Fingerprint recognition failed sounds Access Code Exterior LED indicator fl ashes green Door unlocked Exterior LED indicator fl...
Page 24
Alerts and Sounds Interior Assembly Alerts Battery Interior LED indicator flashes red with a beep sound Battery level is less than 20% (x3) Interior LED indicator fl ashes red with a beep sound Battery level is critically low (3 unlocks (x5) remaining).
Why is my keypad on full blackout? • Battery may have been completely depleted. Use the physical key or a Type-C cable to connect your Lockly to a mobile power source to temporary activate the lock. Charge the battery immediately after unlock.
Page 26
• Check your router if it is combining the 2.4GHz and 5GHz bands. • Refer to your router’s manual to separate the two bands or refer to support.Lockly.com for more details. How to pair my smart lock with a new phone? •...
Page 27
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 28
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. , and any use of such marks by Lockly is under license. Other trademarks and trade names are those of their respective owners. Google, Android, Google Play and Google Home are trademarks of Google LLC.
Need help?
Do you have a question about the Vision PGK798HK and is the answer not in the manual?
Questions and answers