- preventing lifted prints from being used. Live Monitoring and Voice Control Through your smartphone, monitor door access from anywhere in the world and securely control who comes and goes. You can also control your Lockly smart lock using your voice with ®...
Offline Access Code (OAC) and other features of your lock. For any questions you can always visit http://lockly.com/help for assistance. Don’t forget that in order for Lockly Vision to work with full features, it is required to...
2.5 Reset Button In order to setup the Lockly to another smart phone, you must have your “Activation ® Code” available. The Activation Code can be found on the Activation Code Card (PART V) that came with your smart lock.
® will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of Lockly ® lock. The reboot button is located in the middle of the two 9V battery backup sockets.
When your smart lock low-battery warning alert finally dies, video doorbell and recording will be disabled. You will have few more chances to unlock your smart lock either by a password, Lockly ®...
- Make sure the batteries are oriented correctly by matching the orientation displayed. - Replacing the batteries do not reset stored Access Codes. - To see a list of recommended brands, please visit http://Lockly.com/battery. Whenever batteries are replaced, reconnecting the smart lock to your smartphone App is required.
A maximum of 16 sets of Access Codes can be stored for use at any given time. To add more than 16 sets of Access Codes, you must delete an existing Access Code before adding a new code. There are different types of Access Codes that can be generated using the Lockly App. ®...
We are using an advanced biometric sensor, providing the most secure fingerprint authentication. Your smart lock can register up to ninety-nine (99) fingerprints. Use the Lockly app to add fingerprints. ®...
3.3 Fingerprint Scanning Directions The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract only metadata from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image.
Page 14
3.3 Fingerprint Scanning Directions (Continued) Top View Side View Correct Incorrect SECTION 3.3...
• If dry - moisturize or blow warm breath over finger before scanning • If dirty - wipe stains and dirt off from finger before scanning • Make sure the sensor is clean from dirt or smudges - wipe sensor with soft cloth regularly For more troubleshooting help, visit http://lockly.com/help SECTION 3.4...
If the Access Code entered is incor- will flash red light. rect, Lockly ® OK Button Three consecutive wrong attempts will put Lockly in “Safe Mode”. (See Section 4.6) ® Lock your Lockly by pressing the OK Button or by brushing your hand across the screen ®...
4.2 Locking/Unlocking Lockly with Fingerprints ® Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Section 3.6. If your fingerprint is registered and acknowledged, you will hear a “beep”...
4.3 Locking/Unlocking with Physical Key Exterior View We presumed you will not be using the key on a regular basis. To better protect you from malicious lock bumping, video will start recording whenever a key or bumping devices are used to unlock the door. To unlock your lock using the physical key (included), open the key cover by sliding the cover on either left or right direction to reveal the keyhole.
Alexa or Google Assistant and to access video doorbell feature. Please download the app by visiting the link below or search “Lockly” from the correct app store. Scan or visit Lockly.com/app SECTION 4.4...
Once your Lockly Vision and Vision Connect has been installed and configured ™ correctly, make sure you enable the Lockly Action for Google Assistant or the Amazon ® Alexa Skill before you can configure your voice to perform voice commands.
After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly will disable the keypad for 20 minutes, displaying a “20” on the ®...
Page 22
Bluetooth App ® to disable Safe Mode by unlocking the Use the app that is synced to your Lockly ® door. If you have not downloaded the app to use with your smart lock, you won’t be able to use this option to disable Safe Mode.
App and connect Lockly Vision according to on-screen ® ™ instructions Allow your smartphone to receive push notifications or alerts from your Lockly ® app. Please check on iOS or Android procedures for allowing push notifications and alerts. If you're an existing Lockly app user, make sure you have the latest firmware.
Page 24
5.1 Video Doorbell When the doorbell is pressed, you will receive a notification through the Lockly app. ® Once you tap on the notification, app will automatically open to allow you to see who's at your door. Tap the Call icon to initiate conversation.
Page 25
Vision enables you to attend to your door when you are not at home. While using the app, you can use the icons below to view, initiate conversations and unlock door. Live View You can open the Lockly App and tap on ®...
Page 26
5.1 Video Doorbell Video Recording Lockly Vision stores video recording on the local TF card and recording can be ™ accessed on the log history on your Lockly app. ® Vision automatically initiate video recording when below conditions take place:...
(OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or ®...
5.3 Sub-Admin Access Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your Lockly ® smart lock. The sub-admin permission can be setup through the Lockly App then Add ®...
6-pin cylinder which can be replaced with regularly ® purchased DIY re-keying kit available in the market. If you are not familiar with this process, please contact a professional locksmith. For more information, visit : http://support.lockly.com/faq/rekeying/ SECTION 6.1...
Connect (only when pairing is lost) Lockly Vision™ ships already paired to the included Vision Connect hub for easy setup. If you are experiencing any issues, you may be required to re-pair your Lockly Vision™ and Vision Connect Hub. SECTION 7.1...
One-Touch Locking You can always manually lock by touching anywhere on the touchscreen. Lockly ® smart lock is shipped with this feature already activated. You may deactivate this feature through the Lockly App.
9.1 Cleaning Making sure your Lockly is clean is best practice to ensure optimal product use. Follow ® the DOs and DON’Ts below. DON’T • Don’t use abrasives, high • Rinse the touchscreen with alkaline cleaners, or gasoline to warm water prior to cleaning.
Always dispose of used batteries according to your local laws. DO NOT BURN. Unauthorized changes and modifications may void your product warranty. If you have questions or any problems while using your Lockly Vision , contact our ™...
Page 34
Certified FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 35
WARNING:This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information go to www.P65Wamings.ca.gov. VISION ™ We’re here to help! help@lockly.com https://lockly.com/help UMPGD1128FPW20200428...
Page 36
LOCKLY All Rights Reserved ® Lockly Vision is a smart lock with built-in HD video doorbell that combines Lockly's ™ award winning smart lock features and technology with the convenience of today's most popular video doorbells. Lockly makes life easier and safer.