Reset Button; Keypad Display Switch - Lockly LATCH EDITION SECURE PLUS User Manual

2.4 Reset Button

In order to restore the Lockly Secure to factory default settings, you must have your "Activation Code"
available. The Activation Code can be found on the Activation Code Card that came with your smart
lock.
After you have the Activation Code ready, push the reset button on the back panel of the Lockly Secure
to perform your reset. See below to see which Reset Process applies for you. Once the smart lock has
been reset, all the data previously stored will be deleted.
If Paired with App
Press Reset Button
for one (1) second
and till you hear a
short beep.
Open the Lockly
smartphone app to
add your lock using
the Activation Code

2.5 Keypad Display Switch

The exterior keypad screen can be locked and
turned off by using the ON/OFF switch at the back
panel (interior) of the smart lock. When it is switched
off, people who are outside cannot enter any
access codes to unlock the door.
SECTION 2.4~2.5
If Never Paired
Press Reset Button for
three (3) seconds
Reset Button
5