Lockly Secure LUX User Manual
  1. Manuals
  2. Brands
  3. Lockly Manuals
  4. Door locks
  5. Secure LUX
  6. User manual

Lockly Secure LUX User Manual

Mortise lock
Hide thumbs Also See for Secure LUX:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
MORTISE EDITION
SECURE
LUX MORTISE LOCK
USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Lockly Secure LUX

Summary of Contents for Lockly Secure LUX

  • Page 1 MORTISE EDITION SECURE LUX MORTISE LOCK USER MANUAL...

  • Page 2: Table Of Contents

    4.2 Locking/Unlocking Lockly™ with Fingerprints 4.3 Locking/Unlocking Lockly™ with App 4.4 Locking/Unlocking using RFID 4.5 Locking/Unlocking Lockly™ with Physical Key 4.6 Locking and Unlocking with Voice Assistant Control 4.7 Safe Mode - Overview 4.8 Lock and Unlock using Anti-theft Button 4.9 Anti - Theft Button Switch...

  • Page 3: Product Features

    - preventing lifted prints from being used. RFID Card Access You Lockly™ Secure Lux can be accessed by use of RFID card. Complete Privacy The exterior displayed keypad can be locked and switched off using the simple ON/OFF toggle from the inside panel.
  • Page 4 Automatic Lock Owners no longer have to worry about forgetting to lock the door. With Auto Lock enabled, Lockly™ Secure will automatically re-lock the door based on your customized timing set between 5-300 seconds. Backup Keys and 9V Battery Socket The door can be opened with physical backup keys.

  • Page 5: Product Overview- Exterior

    2.1 Product Overview- Exterior Front (Front Body） Touchscreen Keypad Buttons Handle Fingerprint Reader Key Hole Key Hole Cover 9V Battery Back Up Socket RFID Card Reader Power Status Lock Status icon Bluetooth light CARD OK Button Bluetooth icon SECTION 2.1...

  • Page 6: Product Overview- Interior

    2.2 Product Overview - Interior Back (Main Body） Battery Compartment Cover Battery compartment *Operated by 4 X AA size alkaline batteries ( not included ) Program Button Touchscreen Switch Settings Switch Reset Button Anti-theft Button Inside Handle Thumbturn SECTION 2.2...

  • Page 7: Understanding Your New Lock

    OAC (Offline Access Code). For any questions you can always visit http://lockly.com/help for assis- tance. Don't forget that Lockly™ Secure works best with our iOS and Android app. Please download the app by visiting the link below. Scan or visit Lockly.com/app...

  • Page 8: Factory Reset

    2.4 Factory Reset In order to restore the Lockly™ to factory default settings, you must have your “Initial Code” available. The Initial Code can be found on the Initical Code Card that came with your smart lock. (See Quick Start Guide) After you have the Initial Code ready, push the reset button on the back panel of the Lockly™...

  • Page 9: Setting Switch

    Access Codes will still be stored within Lockly™. Press and release the reboot button when you want to reboot the lock. Your Lockly™ will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located below the keyhole from the exteri- or of Lockly™...

  • Page 10: Low Battery

    2.8 Low Battery When the battery is in seriously low condition, Lockly™ will make contin- uous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down.

  • Page 11: Changing The Battery

    2.9 Changing the Battery Open the battery compartment cover and insert 4 AA alkaline battery as shown below. • Make sure the batteries are correctly oriented. • Replacement of batteries does not affect programmed data. • Replace only with new batteries. DO NOT mix with used batteries. AA 1.5V X 4 SECTION 2.9...

  • Page 12: Configuring Access

    1 2 3 4 5 6 NOTICE The Default Access Code is Your new Lockly™ Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted.

  • Page 13: Entering Programming Mode

    Add Passcode Delete Passcode View Passcode Alarm Sensitivity After entering Programming Mode, you should see the screen as displayed to the right on your Lockly™ keypad. Follow the following steps to add, delete, or check your Access Codes. SECTION 3.2...

  • Page 14: Adding An Access Code

    3.3 Adding an Access Code While in Programming Mode, select “1AD” to add an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Program- ming Mode. After pressing “1AD” press “Pd” to add an Access Code. Enter your new 6 - 8 digit Access Code and press when you are finished.
  • Page 15 3.3 Adding an Access Code (Continued) If you have successfully entered your new Access Code twice, you will see the new code displayed here. In this example, we chose 654321. Press to Confirm or to cancel. To exit or cancel, you can always press If the two (2) Access Codes you entered does not match, an error message will appear on the screen (As...

  • Page 16: Deleting An Access Code

    3.4 Deleting an Access Code While in Programming Mode, select “2DE” to delete an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” press “Pd” to delete an Access Code. Example Only Active Access Codes will then be displayed on the screen in sequence from...
  • Page 17 3.4 Deleting an Access Code (Continued) Once you have selected the Access Code you want to delete, Lockly™ will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 3 5 7 9 0.

  • Page 18: Checking The Access Code

    3.5 Checking the Access Codes While in Programming Mode, select “3CH” to check registered Access Codes. If you are not in Programming Mode, please see Section 3.2 to enter Program- ming Mode. Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom.

  • Page 19: Adding A Fingerprint

    3.6 Adding a Fingerprint We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly™ will only accept fingerprint patterns that consist of cross intersection points. Patterns with no cross intersection points will not be acceptable.
  • Page 20 After pressing “1AD” press “FP” to register a Fingerprint. Upon pressing “FP”, you will enter Fingerprint Registration Mode and you will see a green LED ring light up on the fingerprint panel on the exterior of Lockly™. Once you’re in Fingerprint Registration Mode you will see two numbers displayed on keypad.
  • Page 21 3.6 Adding a Fingerprint (Continued) Please make sure your fingers are clean from dirt and oils NOTICE before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. Scan your finger by lightly placing your designated finger on the sensor until you hear a beep.

  • Page 22: Fingerprint Scanning Directions

    3.7 Fingerprint Scanning Directions The fingerprint sensor equipped in Lockly™ is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image.
  • Page 23 3.7 Fingerprint Scanning Directions (Continued) Top View Side View Correct Incorrect SECTION 3.7...

  • Page 24: Fingerprint Scanning Tips & Troubleshoot

    • If dry - moisturize or blow warm breath over finger before scanning • If dirty - wipe stains and dirt off from finger before scanning • Make sure the sensor is clean from dirt or smudges - wipe sensor with soft cloth regularly For more troubleshooting help, visit http://lockly.com/help SECTION 3.8...

  • Page 25: Deleting Stored Fingerprints

    3.9 Deleting Stored Fingerprints* While in Programming Mode, select “2DE” to delete a Fingerprint. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” to delete, press “FP” to delete a fingerprint. Your registered fingerprint numbers will be displayed on the screen.

  • Page 26: Adding An Rfid Card

    3.10 Adding an RFID Card While in Programming Mode , select “1AD” to add an RFID card. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “1AD” press “Id” to add an RFID card. Put the RFID card to the RFID card PASS will show on the keypad once sensor position on exterior panel.

  • Page 27: Deleting Rfid Card

    3.11 Deleting an RFID Card While in Programming Mode, select “2DE” to delete an RFID card. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” press “Id” to add an RFID card. Your registered RFID card will be You will then see a confirmation page displaying Y and N with...

  • Page 28: Adding Secure Link

    Lockly™ products, the Secure Link can be purchased and added anytime. To set up the Lockly™ Secure smart lock with Secure Link Wi-Fi Hub and Door Sensor, launch the Lockly™ App on your iOS or Android device. From the main menu drop down located on the upper left of the screen, select “Add a New Device”...

  • Page 29: Locking/Unlocking With Access Codes

    4.1 Locking/Unlocking Lockly™ with Access Codes Lockly™ Secure can be unlocked using 1 of 5 ways - via your stored Access Code, registered fingerprint, RFID Card, smartphone with Bluetooth, or with the physical key supplied with your lock. Slide your hand across the screen to activate the keypad.

  • Page 30: Locking/Unlocking Lockly™ With Fingerprints

    You must wait until the red LED is off to try again. For best fingerprint scanning practices, see Section 3.7. Locking To lock the Lockly™, press the OK Button OK Button anytime when the door is opened. SECTION 4.3...

  • Page 31: Locking/Unlocking Lockly™ With App

    4.3 Locking/Unlocking Lockly™ with App You must have the Lockly™ iOS or Android app installed in order to lock and unlock with the smartphone app. Please first download the app from the correct store. Scan or visit Lockly.com/app 4.4 Locking/Unlocking using RFID Light up the screen by touching the keypad and move your RFID card closer to the panel.

  • Page 32: Locking/Unlocking Lockly™ With Physical Key

    4.5 Locking/Unlocking Lockly™ with Physical Key Exterior View To unlock your Lockly™ using the physical key (supplied), open the key cover below the exterior handle by pushing the top part of the cover to reveal the keyhole. Insert your key and turn clockwise or counter clockwise to lock or unlock the door.

  • Page 33: Locking And Unlocking With Voice Assistant Control

    4.6 Locking and Unlocking with Voice Assistant Control Once your Lockly™ Smart Lock and Secure Link Wi-Fi Hub has been installed and configured correctly, make sure you enable the Lockly™ Google Home Action and Amazon Alexa Skill first before you can configure your voice to perform voice commands.
  • Page 34 After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly™ will disable the keypad for 20 minutes, displaying a “20” on the screen. After the third wrong attempt to unlock the door with the correct Access Code, the screen will be disabled for 30 minutes.

  • Page 35: Safe Mode - Overview

    Option 2 - Lockly™ Bluetooth App Use the app that is synced to your Lockly™ to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you won’t be able to use this option to disable Safe Mode.

  • Page 36: Lock And Unlock Using Anti-Theft Button

    4.8 Lock and Unlock using Anti-theft Button The Anti-theft button is designed to prevent outsiders from picking your inside door handle with use of wires or improvised tools to unlock door. This also helps to prevent unconscious unlock by children or pets from the inside of your home.

  • Page 37: Anti - Theft Button Switch

    4.9 Anti - Theft Button Switch Lockly Secure Lux is shipped default with anti - theft button deactivated. To Activate, locate the switch at the back on the indoor handle and push to the LEFT. To Deactivate, press the Anti-Theft Button and push the switch to the RIGHT.

  • Page 38: Offline Access Code (Oac)

    To use the OAC feature, make sure you download the Lockly™ app for iOS or Android first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock.

  • Page 39: Section 6 - Important Notes

    Even though you have your fingerprints registered, RFID cards and Access Codes stored, it’s always best practice to carry your physical keys with you at all times in case for any reason, Lockly™ falls into Safe Mode. Initial Code You may find an Initial Code Card with an Initial Code included in your package.

  • Page 40: Section 7 - Cleaning Tips

    7.1 Cleaning Making sure your Lockly™ is clean is best practice to ensure optimal product use. Follow the DOs and DON’Ts below. DON’T • Don’t use abrasives, high • Rinse the touchscreen with alkaline cleaners, or gasoline to warm water prior to cleaning.

  • Page 41: Section 8 - Safety Precaution

    8.1 Safety Precautions Please read all instructions carefully. Remind all Lockly™ users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries.
  • Page 42 Certified Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 43 SECURE We’re here to help! help@lockly.com https://lockly.com/help UMPGD82920190429...
  • Page 44 Other Patents Pending With All Rights Reserved About Lockly™ Secure, Secure Plus, Secure Pro and Secure Lux About Lockly™ Secure, Secure Plus, Secure Pro and Secure Lux are keyless smart locks equipped with the patented PIN Genie , which is a peep proof and hidden camera proof algorithm software.

Table of Contents