Unlocking Using Fingerprint - Lockly LATCH EDITION SECURE PLUS User Manual

4.2 Unlocking Lockly using Fingerprints
OK Button
16
Unlocking
Place a registered finger to the fingerprint scanner
located on the exterior side of the lock to the right.
To register a fingerprint, please see Section 3.6.
If your fingerprint is registered and acknowledged,
you will hear a "beep" sound and a Green LED will
light up on the fingerprint scanner. You can then
push down the handle and open the door.
If you see a Red LED, it means your fingerprint is not
recognized. Try again or use another registered
fingerprint.
For best fingerprint scanning practices, see Section
3.7.
Locking
To lock your smart lock, press the OK Button anytime
or brush your hand across the screen when the lock
is unlocked.
SECTION 4.2