Advertisement

Quick Links

LOCKLY SECURE PRO
LOCKLY SECURE PLUS
LATCH EDITION
USER MANUAL
PGD628F | PGD628W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PGD628WSN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lockly PGD628WSN

  • Page 1 LOCKLY SECURE PRO LOCKLY SECURE PLUS LATCH EDITION USER MANUAL PGD628F | PGD628W...
  • Page 2: Table Of Contents

    Fingerprint Scanning Tips & Troubleshooting Section 8 - Maintenance and Cleaning Deleting Stored Fingerprints Cleaning 3.10 Adding Secure Link Calibrating the Lock Section 9 - Safety Precautions Safety Precautions For additional support, visit http://Lockly.com/help or email help@Lockly.com TABLE OF CONTENTS...
  • Page 3: Product Features

    Live Monitoring and Voice Control Through your smartphone, monitor door access from anywhere in the world and securely control who comes and goes. You can also control your Lockly smart lock using your voice with Amazon Alexa or Google Assistant-enabled devices.
  • Page 4: Product Overview - Exterior

    2.1 Product Overview - Exterior Keypad Buttons Touchscreen Welcome/Safe Mode Battery Indicator OK Button Fingerprint Sensor Bluetooth Indicator Handle Key Hole Cover Key Hole 9V Battery Backup Socket Reboot SECTION 2.1...
  • Page 5: Product Overview - Interior

    2.2 Product Overview - Interior Battery Compartment Screw Battery Compartment 4 x AA Alkaline Batteries(Included) Battery Compartment Cover Reset Button Beep Alert Program Button Low Battery Indicator/ Door Lock Button Keypad Display Switch Handle SECTION 2.2...
  • Page 6: Understanding Your New Lock

    2.3 Understanding Your New Lock After the installation of your new Lockly, understanding some key functions of operating your smart lock is important. The following guides will walk you through resetting a lock, adding/ deleting Access Codes, adding/deleting fingerprints, configuring your Offline Access Code (OAC) and other features of ™...
  • Page 7: Reset Button

    Reset. The smart lock will restart and reset. After reset, you’ll need the Activation Code to reconnect the App. Note: If you replace a new smartphone device, log in your existing Lockly account on the smartphone and reconnect to the smart lock according to the Reset Button APP prompts.
  • Page 8: Rebooting Your Lock

    NOTICE will be changed and all Access Codes will still be stored within Lockly. Press and release the reboot button when you want to reboot the lock. Your Lockly will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of Lockly lock. The reboot button is located in the middle of the two 9V battery backup sockets.
  • Page 9: Low Battery

    2.7 Low Battery When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down.
  • Page 10: Changing The Battery

    2.8 Changing The Battery Under normal use, the Lockly battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand.
  • Page 11: Configuring Access

    The Default Access Code is Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 33 sets of Access Codes can be stored for use at any given time.
  • Page 12: Entering Programming Mode

    Add Access Code Fingerprint Delete Access Code Fingerprint View Access Code After entering Programming Mode, you should see the screen as displayed to the right on your Lockly keypad. Follow the following steps to add, delete, or check your Access Codes. SECTION 3.2...
  • Page 13: Adding An Access Code

    3.3 Adding an Access Code While in Programming Mode, select “1AD” to add an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “1AD” press “Pd” to add an Access Code. Enter your new 6 - 8 digit Access Code and press when you are finished.
  • Page 14 3.3 Adding an Access Code (Continued) If you have successfully entered your new Access Code twice, you will see the new code displayed here. In this example, we chose 654321. Press to Confirm or to cancel. To exit or cancel, you can always press If the two (2) Access Codes you entered does not match, an error message will appear on the screen (As shown to the left).
  • Page 15: Deleting An Access Code

    3.4 Deleting an Access Code While in Programming Mode, select “2DE” to delete an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” press “Pd” to delete an Access Code. Example Only Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom.
  • Page 16 3.4 Deleting an Access Code (Continued) Once you have selected the Access Code you want to delete, Lockly will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 3 5 7 9 0.
  • Page 17: Checking The Access Code

    3.5 Checking the Access Codes While in Programming Mode, select “3CH” to check registered Access Codes. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom.
  • Page 18: Adding A Fingerprint

    Lockly Secure Plus / Pro. We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly will only accept fingerprint patterns that consist of cross intersection points. Patterns with no cross intersection points will not be acceptable.
  • Page 19 Upon pressing “FP”, you will enter Fingerprint Registration Mode and you will see a green LED ring light up on the fingerprint panel on the exterior side of Lockly Secure Plus / Pro. Once you’re in Fingerprint Registration Mode you will see two numbers displayed on keypad.
  • Page 20 3.6 Adding a Fingerprint (Continued) Please make sure your fingers are clean from dirt and oils before scanning NOTICE your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. Scan your finger by lightly placing your designated finger on the sensor until you hear a beep. Lift your finger and repeat the process slowly until the digit “6”...
  • Page 21: Fingerprint Scanning Directions

    3.7 Fingerprint Scanning Directions The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image.
  • Page 22: Fingerprint Scanning Tips & Troubleshooting

    • If wet - wipe excess moisture from finger before scanning • If dirty - wipe stains and dirt off from finger before scanning • Make sure the sensor is clean from dirt or smudges - wipe sensor with soft cloth regularly For more troubleshooting help, visit http://Lockly.com/help SECTION 3.8...
  • Page 23: Deleting Stored Fingerprints

    3.9 Deleting Stored Fingerprints* While in Programming Mode, select “2DE” to delete a Fingerprint. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” to delete, press “FP” to delete a fingerprint. Your registered fingerprint numbers will be displayed on the screen.
  • Page 24: Adding Secure Link

    Lock. If you purchased a Secure Pro model, the Secure Link is included in your package. For all other Lockly products, the Secure Link can be purchased and added anytime. To set up the Lockly Secure smart lock with Secure Link Wi-Fi Hub and Door Sensors, launch the Lockly App on your iOS or Android device.
  • Page 25: Unlocking Using Access Codes

    Five consecutive wrong attempts will put Lockly in “Safe Mode”. (See Section 4.7) Lock your Lockly by pressing the OK Button or by brushing your hand across the screen anytime when the door is closed. The smart lock will also auto-lock after unlocking based on your set auto-lock settings.
  • Page 26: Unlocking Using Fingerprint

    4.2 Unlocking Lockly using Fingerprints Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Section 3.6. If your fingerprint is registered and acknowledged, you will hear a “beep”...
  • Page 27: Locking/Unlocking Using App

    ™ and connect with your Amazon Alexa or Google Assistant-enabled devices. Please download the app by visiting the link below or search “Lockly” from the correct app store. Scan or visit Lockly.com/app...
  • Page 28: Locking/Unlocking Using Physical Key

    If you have multiple Lockly door locks, you can use the Lockly app code scanner to unlock. A QR code sticker (blue color) comes together with your lock. Open the Lockly app and scan it to unlock. You may also generate a unique QR code via Lockly app for your smart lock.
  • Page 29: Locking/Unlocking Using Voice Assistants

    Once your Lockly Smart Lock and Secure Link¹ Wi-Fi Hub has been installed and configured correctly, make sure you enable the Lockly Action on Google or the Amazon Alexa Skill before you can configure your voice to perform voice commands.
  • Page 30: Safe Mode

    4.7 Safe Mode - Overview Lockly will enter Safe Mode when five (5) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash. To disable Safe Mode, you must unlock the door using the correct fingerprint or enter the correct Access Code twice in a row.
  • Page 31 Option 2 - Lockly Bluetooth App Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you won’t be able to use this option to disable Safe Mode.
  • Page 32: Rain Mode

    Like other digital electronic products water can trigger to activate the touchscreen and fingerprint sensor which may cause the batteries to drain. To protect the lock and extend battery life, you can setup your Lockly to enter Rain Mode to shut off keypad and fingerprint reader whenever rain or water is detected.
  • Page 33: Shine Mode

    4.9 Shine Mode Lockly touchscreen keypad brightness was designed for optimum battery life. However, some users may need to adjust the brightness to their convenience to enter access codes. Swipe your fingers across the keypad to light up to its normal brightness.
  • Page 34: Offline Access Code™ (Oac)

    (OAC) is a unique feature of our smart lock. It allows you to grant access to ™ guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or Android first, and sync your ™...
  • Page 35: Sub-Admin Access

    Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your Lockly smart lock. The sub-admin permission can be setup through the Lockly App then Add A New User.
  • Page 36: Important Notes

    Please store this card safely as you will need the default Activation Code on that card to master reset your lock in case, for any reason, you have lost the phone paired to Lockly and also forgot your Access Code.
  • Page 37: Cleaning

    To calibrate the lock, enter access code + 1234 + example: 135790+1234+ NOTE: You may also calibrate the lock using the Lockly App. Open the app, select the lock and go to > Settings > Calibrate. SECTION 8.1 ~ 8.2...
  • Page 38: Safety Precautions

    9.1 Safety Precautions Please read all instructions carefully. Remind all Lockly users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries.
  • Page 39 FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 40 Bluetooth ® SIG, Inc. , and any use of such marks by Lockly is under license. Other trademarks and trade names are those of their respective owners. Google, Android, Google Play and Google Home are trademarks of Google LLC.

Table of Contents