Adding An Rfid Card; Adding Secure Link - Lockly LATCH EDITION SECURE PLUS User Manual

3.5 Adding an RFID card

Once you're in RFID Registration Mode,
the screen will display the RFID card
series number when adding.

3.6 Adding Secure Link

Lockly Secure Link¹ adds live status monitoring and voice control capabilities to your Lockly Smart
Lock. If you purchased a Secure Pro model, the Secure Link is included in your package. For all other
Lockly products, the Secure Link can be purchased and added anytime.
To set up the Lockly Secure smart lock with Secure Link Wi-Fi Hub and Door Sensors, launch the Lockly
App on your iOS or Android
the screen, select "Add a New Device" then select "Secure Link Wi-Fi Hub". Follow the in-app
instructions to set up your Secure Link.
To activate voice commands, you will need Amazon Alexa or Hey Google. Make sure you enable
the Lockly Action on Google or the Amazon Alexa Skill before you can configure your voice to perform
voice commands.
14
device. From the main menu drop down located on the upper left of
™
¹Included in Secure Pro and sold separately for other models.
Visit the link below to purchase:
https://Lockly.com/hub
Place the RFID card to the
screen where the RFID card
sensor is embedded.
PASS will show on the
keypad once card is
registered successfully.
SECTION 3.5 ~ 3.6