Reset Button; Keypad Display Switch - Lockly SECURE PLUS User Manual

2.4 Reset Button

If you need to reset, you must have your Activation Code available. The Activation Code can be
found on the Activation Code Card that came with your smart lock. Once the smart lock has been
reset, all the data previously stored will be deleted. See below which Reset procedure applies for
you.
Never Connected to App
Press Reset Button for 3 seconds, and the smart lock will restart and reset.
Connected to App
In the Settings menu of the App, select Perform Factory Reset. The smart lock will restart and reset.
After reset, you'll need the Activation Code to reconnect the App.
Note:
If you replace a new smartphone device, log in
your existing Lockly account on the smartphone
and reconnect to the smart lock according to the
APP prompts.

2.5 Keypad Display Switch

The exterior keypad screen can be locked and
turned off by using the ON/OFF switch at the back panel
(interior) of the smart lock. When it is switched off,
people who are outside cannot enter any access
codes to unlock the door.
SECTION 2.4 ~ 2.5
OFF
Reset Button
ON
5