Ruijie RG-ES1 Series Hardware Installation And Reference Manual page 13

Hardware Installation and Reference Guide
EEE
PoE
Power
Consumption
Operating
Temperature
Storage
Temperature
Operating
Humidity
Storage Humidity
Port Mode
Fan
Temperature
Warning
Accessing Optical
Module
Information
EMC Standards
Security
Standards
Port1-8：Supported
Port9-10：Not Supported
Support PoE and PoE+.
Ports 1-8 are PoE/PoE+-capable with the maximum power output of 30W per port. Ports
9-10 do not support PoE or PoE+.
The overall maximum output power of PoE/PoE+ is 110W.
Less than 8W with no PoE load
Less than 129W with PoE full load
0° C to 45° C(32° F to 113° F)
-40° C to 70° C(-40° F to 158° F)
10% to 90% RH (non-condensing)
5% to 95% RH (non-condensing)
Support switchover in three modes:
Flow Control On
Flow Control Off
Port Isolation. When this mode is enabled, ports 1-8 are isolated from each
other, but can communicate with ports 9 and 10.
Not supported
Not supported
Not supported
GB/T 9254.1-2021
EN 55032:2015
EN 55035:2017
EN IEC61000-3-2:2019
EN 61000-3-3:2013
Draft ETSI EN 300 386 V2.2.0 (2020-10)
GB 4943.1-2011
EN 62638-1
9
Overview