Ruijie RG-ES1 Series Hardware Installation And Reference Manual page 11

Hardware Installation and Reference Guide
1.3.3 Ports - Front Panel
Figure 1-5 shows the front panel of an RG-ES110D-P switch. For the detailed meanings of numbers 1 to 5, see
the following table.
Figure 1-5 Front Panel of RG-ES110D-P
Item
System status
Copper port status indicator
PoE status indicator
RJ-45 10/100Base-TX PoE port
RJ-45 10/100/1000Base-T
auto-sensing Ethernet port
1.3.4 Ports - Rear Panel
Figure 1-6 shows the rear panel of an RG-ES110D-P switch. For detailed meanings of numbers 1 to 3, see the
following table.
Description
indicator (PWR) System status indicator. The statuses are as follows:
Copper port status indicator. The statuses are as follows:
PoE status indicatorfor ports 1-8. The statuses are as follows:
10/100Base-TX adaptive Ethernet port that supports PoE power supply.
The copper port uses an RJ45 connector.
10/100/1000Base-T adaptive Ethernet port. The copper port uses an RJ45
connector.
Solid green: The system is operational.
Off: The switch is powered off.
Solid green: The port is connected at 10/100/1000 Mbps.
Blinking green: The port is receiving or sending traffic at
10/100/1000 Mbps.
Off: The port is not connected.
Solid green: PoE is operational.
Blinking green: PoE is overloaded.
Off: PoE does not supply power.
7
Overview