Advertisement
TCP/IP Control
The Matrix Pro can be controlled by web GUI via TCP/IP
port. The Matrix Pro's default IP settings are:
Change the IP address of your PC
1.
Configure your PC as follows:
1. Click Start / Control Panel / Network and Sharing
Center.
2. Click Change Adapter Settings.
3. Highlight the network adapter you want to use to
connect to the device and click Change settings of
the connection.
2.
Highlight Internet Protocol Version 4 (TCP/IP/4).
12
IP address: 192.168.0.178
Subnet mask: 255.255.255.0
Advertisement
Need help?
Do you have a question about the Matrix88HD20-Pro and is the answer not in the manual?