gofanco Matrix88HD20-Pro User Manual page 10

IR Remote Control
• Press the Standby (1) button
to enter or exit Standby
mode
• To switch an input to one or
more outputs, first press the
number corresponding to
the desired INPUTS (2),
then press one or more
OUTPUTS (3) or the ALL (4)
button, then press the Enter
(4) button to execute the
command, or press Clear (4)
to cancel
• To set the EDID for one or
more source devices to the
EDID capabilities of a specific
output, first press the EDID
(4) button, then press the
desired INPUTS (2) button,
then press the OUTPUTS (3)
button corresponding to the
desired display, finally press
the Enter (4) button to execute
the operation, or press Clear
(4) to cancel.
10