Table of Contents
Advertisement
Removing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
To remove the bezel, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and all peripheral devices; then, disconnect the power cords
3. Remove the cover (see "Removing the cover" on page 57).
4. From inside the chassis, press up and out on the bezel release tabs to
5. If you are instructed to return the bezel, follow all packaging instructions, and
6. If you are not returning the bezel, store it in a safe place for reuse.
on page 55.
and all external cables.
disengage them from the chassis; then, lift the bezel off of the front of the
server.
use any packaging materials for shipping that are supplied to you.
Bezel
release
tabs
Chapter 4. Removing and replacing server components
59
Advertisement
Table of Contents
