Installing the cover
To install the cover, complete the following steps.
1. Make sure that:
2. Place the front edge of the cover into position on the front edge of the server
3. Install the two thumbscrews at the rear of the cover.
4. Reconnect the external cables and power cords to the server; then, connect the
5. Turn on the attached devices; then, turn on the server.
58
IBM xSeries 100 Type 8486: Problem Determination and Service Guide
Thumbscrews
v All cables, adapters, and other components are installed and seated correctly.
v You have removed all work tools or parts from inside the computer.
v All internal cables are correctly routed.
and lower the cover onto the chassis.
power cords to electrical outlets.