PRESYS
Instruments
2.0 - Installation
2.1 - Mechanical Installation
DMY-2030-Light-5S-Energy Indicator front panel has 1/8 DIN size (48 x 96mm).
It is fixed by the rails which press it against the back side of the panel.
After preparing a 45 x 92 mm cut in the panel, remove the rails from the Indicator
and slide its rear through the cut until its front reaches the panel. Place the rails again in
the Indicator from the back of the panel and tighten the screws as shown in figure 2.
Fig. 2 - Dimensional drawing, panel cutout and side view
Installation
Page 6
DMY-2030-Light-5S-Energy