Table of Contents
Advertisement
PRESYS
Instruments
DMY-2030-Light-5S-Energy
the end of the break condition makes the display to alternate between the process
variable indication and the RL.OUT mnemonic. In order to apply the reset, first go to the
CONF mnemonic and press ENTER to display the PASS mnemonic. Then press the UP,
DOWN and ENTER keys to enable the alarm. The display returns to the exhibition of the
process variable.
Note that the trip function does not apply to the 10 V and 500 mV inputs. It is only
possible to configure the fail alarm for relays 3 and 4 with the trip function disabled.
Fig. 17 - ALAR Level Options
Operation
Page 25
Advertisement
Table of Contents
