Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Remove Motor
Power off and Unplug the unit
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the control
2
side panel. Reference the
Unplug motor from the wiring harness. Refer to the
3
Blue
Arrow.
Remove the (2) screws using a Phillips screwdriver to
4
release the motor assembly. Refer to the
Replace Motor
Install the new motor assembly. Ensure the motor
5
shaft is aligned with the conveyor. Secure using (2)
Phillips Screws.
Connect the motor wiring harness. Previously removed
6
in step 3.
Using a Phillips head screwdriver, secure the control
7
side panel. Previously removed in step 2.
Plug in unit. Power on and ensure the unit is fully
8
functional.
IRT-SB-NA-1PS
IRT-SB-NA-3PS
WARNING
Red
Arrow.
Green Ar-
# 2
18
References
Printed in USA 12/3/2020
353-567 Rev. B
# 4
# 4