Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Reinstall the calrod by inserting into the unit from the
9
Control Side. Previously removed in step 8.
On the right side, secure the calrod to the calrod
10
connecting bracket using a Phillips screw. Previously
removed in step 7
On the right side, secure the calrod to the unit using a
11
Phillips screw. Previously removed in step 6.
On the right side, reinstall all insulation that covers the
12
calrod connections. Previously removed in step 5.
On the control side, secure the calrod to the unit using
13
a Philips screw. Previously removed in step 4.
Using a Phillips head screwdriver, secure the right side
14
panel. Previously removed in step 3.
Using a Phillips head screwdriver, secure the control
15
side panel. Previously removed in step 2.
Plug in unit. Power on and ensure the unit is fully
16
functional.
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Replace Calrod(s)
21
Printed in USA 12/3/2020
353-567 Rev. B