Remove Control Side Fan; Replace Control Side Fan - Prince Castle IRT-SB-NA-1PS Service Manual

Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS

Remove Control Side Fan

Power off and Unplug the unit
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the control
2
side panel. Reference the
Remove (2) wires from the Axial fan. Note the position
3
of the wiring.
Remove (4) Phillips Screws and lift straight up on the
4
fan to remove. Reference the Green Arrows

Replace Control Side Fan

Install the fan and secure using (4) Phillips screws in
5
the orientation shown. Previously removed in step 4.
Install the (2) wires onto the fan. Brown= Top.
6
Orange/Black= Bottom. Previously removed in step 3.
Using a Phillips head screwdriver, secure the control
7
side panel. Previously removed in step 2.
Plug in unit. Power on and ensure the unit is fully
8
functional.
IRT-SB-NA-1PS
IRT-SB-NA-3PS
WARNING
Red Arrow.
# 2
# 4
# 4
29
References
Printed in USA 12/3/2020
353-567 Rev. B
# 4
# 4