Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Remove Display Assembly
Power off and Unplug the unit
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Remove the Main Control Board. Reference the Main
2
Control Board Removal on Page 15.
Unplug the Display Harness. Refer to the
3
Remove the (4) M3 nuts. Lift the display assembly off
4
the control side panel. Refer to the
Replace Display Assembly
Reinstall the display assembly by installing the (4) M3
5
nuts. Previously removed in step 4.
Plug in the display harness. Previously removed in step
6
3.
Replace the Main Control Board. Reference the Main
7
Control Board Replacement on Page 14.
Plug in unit. Power on and ensure the unit is fully
8
functional.
IRT-SB-NA-1PS
IRT-SB-NA-3PS
WARNING
Red
Arrow.
Blue Arrows.
# 4
# 3
# 4
19
References
# 4
# 4
Printed in USA 12/3/2020
353-567 Rev. B