Remove Calrod(S) - Prince Castle IRT-SB-NA-1PS Service Manual

Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Unplug the unit
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the control
2
side panel. Reference the
Using a Phillips head screwdriver, open the right side
3
panel. Reference the
On the unit's control side, remove the screw that
4
secures the Calrod which needs to be replaced.
Reference the Blue Arrow.
On the right side of the unit, remove all insulation that
5
is covering the Calrod connections.
On the right side of the unit, remove the screw that
6
secures the calrod which needs to be replaced.
Reference the Orange Arrow.
On the right side of the unit, remove the screw that
7
secures the calrod to the calrod connecting bracket.
Reference the Black Arrow.
On the control side of the unit, remove the calrod by
8
pulling out. The calrod may need to be rotated while
removing. Refer to the
IRT-SB-NA-1PS
IRT-SB-NA-3PS

Remove Calrod(s)

WARNING
Red Arrow.
Green Arrow.
Yellow Arrow.
# 4
# 8
20
# 2
# 3
Printed in USA 12/3/2020
353-567 Rev. B
# 6