Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Remove Power Cord
Unplug the unit
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the right side
2
panel. Reference the
Remove (3) connections from power cord by removing
3
the three screws shown, Reference the
Unscrew the back of the strain relief bushing to
4
release the power cord. Remove the power cord from
the unit completely. Refer to the
Replace Power Cord
Reinstall the power cord onto the unit. Tighten the
5
strain relief bushing. Previously removed in step 4.
Reinstall the (3) connections from the power cord on
6
the points shown. Previously removed in step 3.
Using a Phillips head screwdriver, reinstall the right
7
side panel. Previously removed in step 2.
Plug in unit. Power on and ensure the unit is fully
8
functional.
IRT-SB-NA-1PS
IRT-SB-NA-3PS
WARNING
Red
Arrow.
Blue Arrow.
Green
Arrow.
# 2
26
# 4
Printed in USA 12/3/2020
353-567 Rev. B