Remove Control Side Bread Selection Board; Replace Control Side Bread Selection Board - Prince Castle IRT-SB-NA-1PS Service Manual

Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS

Remove Control Side Bread Selection Board

Power off and Unplug the unit
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the control
2
side panel. Reference the
Disconnect the harness from the Bread Selection
3
Board. Reference the
Remove (2) Phillips Screws and (2) washers, and
4
remove the assembly. Reference the

Replace Control Side Bread Selection Board

Install the new Bread Selection Board using (2) Phillips
5
screws and (2) Washers. Previously removed in step 4.
Reinstall the wiring harness onto the Bread Selection
6
Board. Previously removed in step 3.
Using a Phillips head screwdriver, secure the control
7
side panel. Previously removed in step 2.
Plug in unit. Power on and ensure the unit is fully
8
functional.
IRT-SB-NA-1PS
IRT-SB-NA-3PS
WARNING
Red Arrow.
Blue Arrow.
Green Arrows.
# 2
22
References
# 3
# 4
# 3
Printed in USA 12/3/2020
353-567 Rev. B