Remove Power Supply; Replace Power Supply - Prince Castle IRT-SB-NA-1PS Service Manual

Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS

Remove Power Supply

Power off and Unplug the unit
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the control
2
side panel. Reference the
Remove the (2) connectors from the power supply.
3
Reference the Blue
Remove the (4) screws using a Phillips screwdriver to
4
free the power supply. Reference the

Replace Power Supply

Secure the new power supply by using (4) Phillips
5
screws. Previously removed in step 4.
Install the (2) connections onto the power supply.
6
Previously removed in step 3.
Using a Phillips head screwdriver, secure the control
7
side panel. Previously removed in step 2.
Plug in unit. Power on and ensure the unit is fully
8
functional.
IRT-SB-NA-1PS
IRT-SB-NA-3PS
WARNING
Red Arrow.
Arrows.
Green Arrows.
# 2
27
References
#
3
#
3
Printed in USA 12/3/2020
353-567 Rev. B