Remove Power Switch; Replace Power Switch - Prince Castle IRT-SB-NA-1PS Service Manual

Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS

Remove Power Switch

Power off and Unplug the unit
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the right side
2
panel. Reference the
Remove (4) connectors from the power switch. Note
3
the wiring configuration. Reference the
Remove the power switch from the unit. There are
4
two tabs on each side that will need to be released.

Replace Power Switch

Reinstall the power switch. The switch is made to snap
5
in from the outside.
Reconnect (4) connectors on the power switch. Refer
6
to step 3 for the wiring orientation.
Using a Phillips head screwdriver, secure the right side
7
panel. Previously removed in step 2.
Plug in unit. Power on and ensure the unit is fully
8
functional.
IRT-SB-NA-1PS
IRT-SB-NA-3PS
WARNING
Red Arrow.
Blue Arrows.
# 2
# 3
28
Printed in USA 12/3/2020
353-567 Rev. B