Header Rec Menu Screen - JVC GY-DV5100U User Manual

11. MENU SCREENS

11-12 HEADER REC Menu Screen

The HEADER REC menu screen is used for settings related to the HEADER REC function. (☞ page 58)
Item
START KEY Sets whether the HEADER REC operation should be executed when
the VTR trigger button is pressed while the STOP button is pressed.
STOP+VTR : HEADER REC operation is executed.
DISABLE
TC DATA Sets the time code value for the point when the Record-Standby mode
is engaged following completion of HEADER REC.
EXECUTE
ZERO PRESET : Resets all time codes to zero (0).
CANCEL
The Frame mode will in accordance with the setting of the DROP/NON
DROP item on the TC/UB/CLOCK menu screen.
* The time code value at the point when the Record-Standby mode is
engaged may differ some frames from the value set for this item.
UB DATA Sets the user's bits of the HEADER REC section.
EXECUTE
ZERO PRESET : Resets all user's bits data to zero (0).
CANCEL
MEMO:
The user's bits for the normal recording section are set on the TC/
UB/CLOCK menu screen.
BARS TIME Sets the duration (seconds) in which the color bar signal and test tone
(1 kHz) is recorded during HEADER REC. (1-sec steps)
BLACK TIME Sets the duration (seconds) in which the black signal is recorded during
HEADER REC. (1-sec steps)
PAGE BACK The TC/UB/CLOCK menu screen returns when the SHUTTER dial is
pressed.
84
Function
: HEADER REC operation is not executed.
: Confirms the set time code.
: Clears the set time code.
: Confirms the set user's bits.
: Clears the set user's bits.
Variation Range Initial Setting
STOP+VTR DISABLE
DISABLE
EXECUTE EXECUTE
ZERO PRESET
CANCEL
EXECUTE EXECUTE
ZERO PRESET
CANCEL
0 SEC 30 SEC
to
99 SEC
0 SEC 30 SEC
to
99 SEC
––––– –––––