Header Rec Menu Screen - JVC gy-dv5100 Instructions Manual

11. MENU SCREENS

11-12 HEADER REC Menu Screen

The HEADER REC menu screen is used for settings related to the HEADER REC function. (☞ page 58)
Item
START KEY Sets whether the HEADER REC operation should be executed when
the VTR trigger button is pressed while the STOP button is pressed.
STOP+VTR : HEADER REC operation is executed.
DISABLE
TC DATA Sets the time code value for the point when the Record-Standby mode
is engaged following completion of HEADER REC.
EXECUTE
ZERO PRESET : Resets all time codes to zero (0).
CANCEL
The Frame mode will in accordance with the setting of the DROP/NON
DROP item on the TC/UB/CLOCK menu screen.
* The time code value at the point when the Record-Standby mode is
UB DATA Sets the user's bits of the HEADER REC section.
EXECUTE
ZERO PRESET : Resets all user's bits data to zero (0).
CANCEL
BARS TIME Sets the duration (seconds) in which the color bar signal and test tone
(1 kHz) is recorded during HEADER REC. (1-sec steps)
BLACK TIME Sets the duration (seconds) in which the black signal is recorded during
HEADER REC. (1-sec steps)
PAGE BACK The TC/UB/CLOCK menu screen returns when the SHUTTER dial is
pressed.
Downloaded From CamcorderManual.com JVC Manuals
84
: HEADER REC operation is not executed.
: Confirms the set time code.
: Clears the set time code.
engaged may differ some frames from the value set for this item.
: Confirms the set user's bits.
: Clears the set user's bits.
MEMO:
The user's bits for the normal recording section are set on the TC/
UB/CLOCK menu screen.
Function Variation Range Initial Setting
STOP+VTR DISABLE
DISABLE
EXECUTE EXECUTE
ZERO PRESET
CANCEL
EXECUTE EXECUTE
ZERO PRESET
CANCEL
0 SEC 30 SEC
to
99 SEC
0 SEC 30 SEC
to
99 SEC
––––– –––––