Table of Contents
Advertisement
6-7 Audio Input Signal Selection
VF
OFF
ZEBRA
SKIN
AUTO
ON
AREA
WHITE
ACCU
FOCUS
VTR
AUDIO
LEVEL CH-1
5
FRONT MIC IN
connector
The GY-DV5100 is provided with the FRONT MIC IN connector
and the REAR AUDIO IN connector for audio input.
Two channels of sound can be recorded on the tape in digital
PCM format. Using the AUDIO IN switch, select for each
channel (CH-1 and CH-2) whether the sound to be recorded
should be the sound from the FRONT MIC IN connector or the
sound from the REAR AUDIO IN connector.
■ Selecting the CH-1 channel input sound
Make the selection using the CH-1 AUDIO IN switch.
FRONT : The sound from the FRONT MIC IN connector is
recorded on the CH-1 channel.
REAR : The sound from the REAR AUDIO IN connector is
recorded on the CH-1 channel.
■ Selecting the CH-2 channel input sound
Make the selection using the CH-2 AUDIO IN switch.
FRONT : The sound from the FRONT MIC IN connector is
recorded on the CH-2 channel.
REAR : The sound from the REAR AUDIO IN connector is
recorded on the CH-2 channel.
■ Selecting the FRONT MIC IN connector
Select the microphone to connect to the FRONT MIC IN
connector using the FRONT MIC +48V (ON/OFF) switch.
ON:
Set to this position when a microphone requiring
+48 V power supply (phantom microphone) is
connected.
Use this setting to connect the included
microphone to the FRONT MIC IN connector.
OFF:
Set to this position when connecting a
microphone that does not require +48 V power
supply.
CAUTION:
Before connecting a component that does not require +48 V
power supply, make sure that the FRONT MIC +48V (ON/
OFF) switch is not set to ON.
Neglecting this could cause damage to the connected
component..
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
EDITSEARCH
MONITOR
FILTER
3200K
1
2
5600K
1 8
/
ND
.3
5600K
.4
5600K
1 64
/ ND
STATUS
SHUTTER
MENU
AUTO IRIS
FULL AUTO
BLACK
LOLUX
BACK L
STRETCH
NORMAL
NORMAL
SPOT L
COMPRESS
POWER
VTR
ON
OFF
CH-1 AUDIO IN switch
FRONT MIC +48V
(ON/OFF) switch
AUDIO
CH-1
LEVEL
FRONT MIC +48V
ON
OFF
REAR AUDIO IN
(LINE/MIC) switch
OPEN
LCD BRIGHT
DISPLAY
AUDIO
LEVEL
PULL
OPEN
FRONT
REAR
CH-1
CH-2
CH-1
CH-2
MODE
AUDIO IN
AUDIO SELECT
VTR
CH-1
CH-2
AUTO
CAM
MANUAL
CH-2 AUDIO IN switch
LCD BRIGHT
DISPLAY
MONITOR
SELECT
COUNTER
CH-1
FRONT
MIX
TC
CH-2
REAR
UB
CH-1
CH-2
CH-2
AUDIO IN
REAR
AUDIO SELECT
AUDIO IN
CH-1
CH-2
TC GENE.
CH-1
CH-2
AUTO
PRST
FREE
LINE
MIC
MANUAL
REC
+48V
REGEN
■ Selecting the REAR AUDIO IN connector
Select the sound to be input to the REAR AUDIO IN connector
using the REAR AUDIO IN (LINE/MIC) switch. The setting is
made individually for both the REAR AUDIO IN connector.
LINE
: Set to this position when connected to audio
equipment, etc.
The reference input level is +4 dBs.
MIC
: Set to this position when using a monaural
microphone.
The reference input level is –60 dBs.
+48 V
: Set to this position when a microphone
(phantom microphone) requiring +48 V DC
power supply is connected.
CAUTION:
Before connecting a component that does not require +48
V power supply, make sure that the REAR AUDIO IN (LINE/
MIC) switch is not set to +48 V.
Neglecting this could cause damage to the connected
component.
PHONES
TALLY
DV
INT
DC IN
DC OUT
CH-1
CH-2
REAR AUDIO IN
REAR AUDIO IN
connector
51
Advertisement
Table of Contents
