JVC GY-DV5100U User Manual page 25

■ Status Screen in VTR MODE (DV Signal Input Mode)
No. Item
1 Indication of Time Code (TC)/User's Bits (UB)
2 Remaining tape time
3 Indication of the DV Disk Recorder status
4
Voltage indication
or
Battery indication
5 Time/Date indication
6
Audio sampling frequency indication
7
Audio level meter indication
8
VTR mode indication
9
Event display
2. CONTROLS, INDICATORS AND CONNECTORS
9
Event display area
8
PLAY 01/02/03 AM01:23:45
7
In the playback mode, the recorded time code (hour, minute, second, frame)
is displayed. Whether or not to display this item is set with the TC/UB item
on the LCD/VF (2/2) menu screen. Whether to show the time code or the
user's bits is selected with the COUNTER switch inside the side cover.
Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3
minutes.
Whether or not to display this item is set with the TAPE REMAIN item on
the LCD/VF (2/2) menu screen.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be used only as a guide.
* When the unit is used at low temperatures, it may take a while before the
indication of the remaining tape time appears.
Displayed when the optional DV Disk Recorder is connected.
: Displayed (white) when the DV Disk Recorder is connected.
●
: Displayed (red) when the DV Disk Recorder is recording.
(Example) 12.2 V : Indicates battery voltage in 0.1 V steps.
(Example)
(Example)
Select the display method with the BATTERY INFO item on the LCD/VF
(2/2) menu. ☞ See page 82
Recorded data are displayed during playback, fast forward, and rewind.
(Only when the DATE REC item is set to OFF (☞ See page 85))
During recording and stop mode, the data from the DV connector is
displayed.
Whether or not the date and time should be displayed and the display style
are set on the TIME/DATE menu screen.
When the date and time have not been set, the following indication appears.
– – / – – / – – – – : – – : – –
The audio sampling frequency used for the recording is displayed during
playback.
(32 K, 48 K, 44.1 K)
Displays the audio level meters during playback.
Whether or not to display this item is set with the AUDIO item on the LCD/
VF (2/2) menu screen.
Indicates the VTR operation status.
STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, BSRH, – – – (No
tape loaded), SLOW: During variable playback in forward direction
BLANK SEARCH : Indicates that blank search operation is in progress.
1
00:00:00:00
2
20min
DD 3
6
4
48k 12.2V
5
Contents
100%: Remaining battery is shown in percentage [%].
60min: Remaining battery is shown in minutes [min].
(SLOW+1: About ×0.1 speed, SLOW+2: About ×0.2
speed, SLOW+3: About ×0.5 speed)
During variable playback in reverse direction
(SLOW–1: About ×–0.1 speed, SLOW–2: About
×–0.2 speed, SLOW–3: About ×–0.5 speed)
25