Header Rec Menu Screen - JVC GY-HD110 Instructions Manual

MENU SCREENS

HEADER REC Menu Screen

The HEADER REC menu screen is used for settings related to the HEADER REC function. (X See page 52.)
Item
START KEY
TC DATA
UB DATA
BARS TIME
BLACK TIME
PAGE BACK
78
Function/Setting (bold characters indicate initial settings)
Sets whether the HEADER REC operation should be executed when the REC/VTR trigger button is pressed while
the STOP button is pressed.
DISABLE : HEADER REC operation is not executed.
STOP+REC : HEADER REC operation is executed.
Sets the time code value for the point when the Record-Standby mode is engaged following completion of HEADER
REC.
EXECUTE : Confirms the set time code.
ZERO PRESET : Resets all time codes to "0".
CANCEL : Clears the set time code.
The frame mode is set depending on the setting in the DROP/NON DROP item on the TC/UB/CLOCK menu screen.
* The time code value at the point when the Record-Standby mode is engaged may differ some frames from the val-
ue set for this item.
Sets the user's bits of the HEADER REC section.
EXECUTE : Confirms the set user's bits.
ZERO PRESET : Resets all user's bits data to "0".
CANCEL : Clears the set user's bits.
MEMO
• The user's bits for the normal recording section are set on the TC/UB/CLOCK menu screen.
• When the "UB REC" item is set to "OFF", "--------" is displayed and this cannot be selected.
Sets the duration (seconds) in which the color bar signal and test tone (1 kHz) is recorded during HEADER REC. (1-
sec steps)
[Settings: 0SEC - 30SEC - 99SEC]
Sets the duration (seconds) in which the black signal is recorded during HEADER REC. (1-sec steps)
[Settings: 0SEC - 30SEC - 99SEC]
The TC/UB/CLOCK menu screen returns when the SHUTTER dial is pressed.