JVC GY-DV5100U User Manual page 27

■ Alarm Message Display
Alarm display area
Alarm display area
01/02/03 AM01:23:45
Alarm Indication
PAL INHIBIT
REC INHIBIT
COPY INHIBIT
LOW VOLTAGE*
TAPE NEAR END
TAPE END
INVALID TAPE!
LP TAPE INVALID!
NO TAPE
NO DV SIGNAL
COPY GUARD!
CLEANING TAPE!
HEAD CLEANING REQUIRED!
CLOSE CASSETTE COVER!
OPEN CASSETTE COVER!
VTR WARNING (Error code)*
(Example) 7001
DRUM MOTOR FAILURE
* When displaying enlarged characters, only LOW VOLTAGE and VTR WARNING are displayed.
2. CONTROLS, INDICATORS AND CONNECTORS
● The following alarm messages are displayed while the Status(0, 1, 3)
screen is shown in the Camera mode, or a status screen is shown in
the VTR mode.
If an alarm is generated while the Status 2 screen is shown, the Status
0 screen returns to display the alarm.
FAS
● When an abnormality occurs in the VTR, a warning message with an
–3dB
FAW
error code is displayed.
I
SD
B
12.2V
Displayed when attempt is made to play back a tape recorded with PAL signal.
Displayed when an unrecordable videocassette (the switch on the back of the
cassette is set to "SAVE") is loaded.
Displayed when attempt is made to record a copy-guarded signal.
Displayed when remaining battery power becomes low.
Flashes when the remaining tape is 3 minutes or less in the shooting mode. It is
not shown in the playback mode.
Displayed when the tape has reached its end.
Displayed when a data tape for PC use or DVC PRO cassette is used. The tape
is ejected.
Displayed when attempt is made to playback a tape recorded in the LP mode.
Displayed when no videocassette is inserted and the VTR trigger button is
pressed.
Displayed when there is no input to the DV connector and recording is attempted.
Displayed when attempt is made to play back a copy-guarded tape.
Displayed when a head cleaning tape is inserted.
Displayed when head is clogged. Head cleaning is necessary.
Displayed when operation is attempted while the cassette cover is open.
Displayed when the cassette cover is closed during the eject operation.
Displayed in case abnormalities occur in the VCR, or when condensation occurs
in the unit. For details, ☞ see page 97.
Contents
27