Digital Watchdog MEGApix Flex DWC-PVX20WATW User Manual page 30

Setup - Camera Setup
Camera White Balance
2
3
4
5
VIN Source - Each of the camera's sensors must be set up separately. Select between Video 1 ~ Video 4 for
1
each of the camera's sensors. The settings below will apply to that sensor only.
Click 'Save' to save the settings before changing to another video source.
Activation - Enable or disable the white light settings.
2
White Balance Mode - When enabled, select the White Balance mode from the drop-down menu options
3
based on the lighting conditions.
Auto - the camera will automatically determine the best white balance settings for a clear image
Manual - the user may manually assign the R/G/B Gain values for the camera
NOTE: The camera White Balance settings may be adjusted to control the color balance of the camera image.
RGB Gain - The R/G/B gain values can be adjusted when the white balance mode is set to 'Manual'.
4
Click 'Save' to save the current settings.
5
Click 'Cancel' to return to the previous setting.
Click 'Default' to settings to the factory defaults.
30
1