Digital Watchdog MEGApix Flex DWC-PVX20WATW User Manual page 26

Setup - Camera Setup
Camera Image Adjustment
2
3
4
5
6
7
VIN Source - Each of the camera's sensors must be set up separately. Select between Video 1 ~ Video 4 for
1
each of the camera's sensors. The settings below will apply to that sensor only.
Click 'Save' to save the settings before changing to another video source.
Sharpness - Adjust the sharpness of the image as needed.
2
Brightness - Adjust the brightness of the image as needed.
3
Contrast - Adjust the contrast of the colors in the image as needed.
4
Saturation - Adjust the saturation of colors in the image as needed.
5
Hue - Adjust the hue of the image as needed.
6
Click 'Save' to save the current settings.
7
Click 'Cancel' to return to the previous setting.
Click 'Default' to settings to the factory defaults.
26
1