July 19, 2004
CONFIG — SNMP GATEWAY INFO
If you enable gateway functionality, it is configured as a manageable SNMP node and it receives trap notification
from all AMUs on its network then forwards traps to the IP Address that is configured as a trap recipient
disable gateway functionality, the AMU is not a manageable node via SNMP and will not forward trap notifications.
Refer to
Table 24 on page 78
This procedure shows how to enable gateway functionality. Once the gateway is enabled, it works the same
way to disable the gateway functionality.
CONFIG — SNMP GATEWAY INFO
Step
1
At the Main Menu screen, select CONFIG. Press
screen appears.
ADC Telecommunications, Inc.
for SNMP Gateway Information
Action
to choose SNMP Gateway Info. The following
↓
SCP-AMU912-010-06H
.
If you
75
Need help?
Do you have a question about the PG-FlexPlus AMU-912 and is the answer not in the manual?