Table 8. Amu-912 Front Panel Leds; Table 9. Amu-912 Diagnostic Indicators - ADC PG-FlexPlus AMU-912 Manual

SCP-AMU912-010-06H
LED
CRIT
PWR
MAJ
MN
ACTIVE
COM
FAULT
ACO
LED State
PWR LED On,
All other LEDs Flashing
PWR LED On,
All other LEDs sequencing
downward
FAULT On, All other LEDS Off
12

Table 8. AMU-912 Front Panel LEDs

Color State
Red On
Off
Green On
Flashing
Off
Red On
Off
Yellow On
Off
Green Flashing
Off
Green On
Off
Red On
Off
Yellow On
Off

Table 9. AMU-912 Diagnostic Indicators

Description
AMU-912 is running in Boot Mode
Software download to AMU-912
AMU-912 hardware failure
Description
One (or more) Critical Alarm(s) active in shelf
No Critical alarms active
AMU-912 is receiving power
One of the two battery feeds is not present
AMU-912 is not receiving power
One (or more) Major Alarm(s) active in shelf
No Major alarms active
One (or more) Minor Alarm(s) active in shelf
No Minor alarms active
Ethernet activity
No Ethernet activity
Multishelf management is active
Multishelf management is not active
Replace the AMU-912
No fault detected
ACO activated
ACO not activated
Application software must be re-
installed. Contact
on page 115
information.
Wait for download to complete and
AMU-912 to re-start
Replace AMU-912
July 19, 2004
Action
Product Support
for additional
ADC Telecommunications, Inc.