SCP-AMU912-010-06H
E
M
RROR
ESSAGES
Table 35
defines potential download error messages.
Message
Download Failed.
Bad X-Modem Data
Received.
Download Failed.
General Failure.
Download Timeout.
X-Modem Session Never
Started By Craft Terminal.
Download Failed.
Unknown Failure.
Download Failed.
X-Modem Timeout
Occurred During Download.
Download Failed.
Invalid File For This Card.
Download Failed.
Invalid Memory Boundaries
For File Type.
Download Failed.
Incorrect Download File
Selected. Need To
Download Boot Code.
Download Failed.
Incorrect Download File
Selected. Need To
Download Application Code.
Download Failed.
XMODEM Session Stopped
By The User.
108
Table 35. Error Messages
A number of factors can cause this error to occur, such as a cable pulled
during download or user cancellation. Basically, a generic error
indicating a failure to complete the download occurred somewhere
between the AMU-912 and the terminal emulator.
A number of factors can cause this error to occur. Retry downloading.
The user did not instruct the terminal emulator to begin an upload within
two minutes of the AMU-912 indicating that it was ready for the download
to begin.
A number of factors can cause this error to occur. Retry downloading.
Displayed in situations where the terminal program began sending data,
but for some reason the AMU-912 has stopped receiving data. If
possible, verify that the terminal emulator is functioning correctly.
The file selected for download was the wrong file for the card selected or
the file has been corrupted.
The file selected for download was the wrong file for the card selected or
the file has been corrupted.
The file selected for download was the wrong file for the card selected or
the file has been corrupted.
The file selected for download was the wrong file for the card selected or
the file has been corrupted.
The user manually stopped the downloading while the downloading
session was in process.
Description
ADC Telecommunications, Inc.
July 19, 2004
Need help?
Do you have a question about the PG-FlexPlus AMU-912 and is the answer not in the manual?