ADC PG-FlexPlus ARL-942 Manual page 95

January 6, 2003
CONFIG — Set Factory Defaults (Continued)
Step
3 The following actions can be taken:
To reset the system options back to the original factor default settings, press
Configuration Data Will Be Set To Factory Defaults. Continue (Y/N)? prompt, the
following actions can be taken:
• To save the Factory Default changes, press
– all current values are reset to the factory default values
• To retain the existing configuration data, press
4
Press . The Main Menu screen reappears.
ESC
ADC Telecommunications, Inc.
Action
. The following events occur:
Y
.
N
SCP-ARL942-010-02H
. From the
ENTER
83