Table 8. Adsl-A And Adsl-B Status - ADC PG-FlexPlus ARL-942 Manual

SCP-ARL942-010-02H
State
ADSL Status (1-8)
Administrative Port Status
Operational Link Status
Coding Type
Channel Type
Upstream S/N Margin (dB)
Tx Rate (kbits/sec)
Link Attenuation (dB)
Interleave Delay (ms)
26

Table 8. ADSL-A and ADSL-B Status

Value
Disabled, Enabled
UP, DOWN, STARTUP Indicates ADSL link status between ADSL port and
G.DMT, G.Lite, ANSI,
ANSI (non-std.), N/A
Fast, Interleaved
1-255
32-1024 (Upstream)
32-8160 (Downstream)
1-255 (Upstream)
1-255 (Downstream)
1-255 (Upstream)
1-255 (Downstream)
Description
Determines whether ADSL port should pass data or
not. Data will not pass when port is disabled.
Customer Premise Equipment (CPE) - usually ADSL
modem
Line coding type of the ADSL link. When link status is
DOWN, coding type is N/A. When link status is up,
coding type is actual type of connection.
Indicates whether interleave buffers are used on
ADSL channels or not (thus indicating ADSL channel
type)
Upstream S/N ratio as determined by the ADSL port.
Downstream S/N is determined by the CPE.
Downstream and Upstream Transmit data rate
reported by ADSL port
Measured signal loss between RT and CPE
Additional transmission delay due to the error correct-
ing code of the ADSL channel
January 6, 2003
ADC Telecommunications, Inc.