Mounting; About Mounting; How To Mount Dynaprox - Magtek DynaProx Installation And Operation Manual

4 - Installation
4.4

Mounting

4.4.1 About Mounting

DynaProx products are designed to provide flexible mounting options:
•
The device can be mounted to custom mounting brackets or mounted in an enclosure as part of a
larger solution design.
•
The device can be mounted to the optional stand for countertop use.

4.4.2 How to Mount DynaProx

This document describes how to use DynaProx securely. Using the device in any way
other than the approved methods described in this document invalidates the PCI PTS
approval of the device.
Not following the guidelines in this section could damage the device, render it inoperable,
and/or violate the conditions of the warranty.
This section provides information and guidelines for designing the mechanical aspects of a solution that
incorporates DynaProx products. MagTek strongly recommends vetting and testing solution designs
before finalizing and deploying them, to make sure the design meets all requirements (e.g., functional,
legal, security, certification, safety, and so on).
When designing the mechanical portions of a solution that incorporates DynaProx products, consider the
following:
•
Review section 1.4 About DynaProx Components for an overall introduction to the device's
physical features and what they are called.
•
Review Appendix A Technical Specifications.
•
Review the information below about overall device dimensions and mounting hole locations and use.
•
Review any additional requirements from other agencies, such as PCI and EMV solution certification
requirements, safety ordinances, and so on, which may introduce additional constraints to the design.
DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual
Page 30 of 57 (D998200490-11)