How To Mount The Stand - Magtek DynaProx Installation And Operation Manual

4 - Installation

4.4.3 How to Mount the Stand

Major Components
Stand Contents:
Stand Body: The body of the stand. Angled for better ergonomics.
Cable Channel: Allows the cable to be channeled out the back of the stand body.
(4) M4 Screws: Attaches the stand body to the DynaProx device
(2) Flat-head Screws: Attaches the base plate to the stand body.
Base Plate: Bottom of stand, can attach the stand to counter tops
DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual
Page 36 of 57 (D998200490-11)