Magtek DynaProx Installation And Operation Manual page 22

2 - Planning and Preparation
o 1000007406 DynaFlex, DynaProx Test Utility installed, which advanced operators can use
to configure and test the device.
o 1000007405 DynaFlex, DynaProx Firmware Upload Utility installed, which advanced
operators can use to update the device's firmware.
•
Determine the final set of tools advanced operators will use to configure, test, and update the device.
This documentation uses the 1000007406 DynaFlex, DynaProx Test Utility as an example for
configuring the device; it can be used for initial pre-deployment testing and development, and as
sample code showing how to communicate with the device, but the full solution may call for
customized, solution-specific software for configuring the device and updating firmware.
•
Determine how to inspect devices upon arrival, upon installation, and periodically during live usage,
to ensure malicious individuals have not tampered with them. Details about inspection are provided
in section 4.1 About Inspection.
•
Develop procedures for maintaining the device(s). Detailed guidance is provided in section 7
Maintenance.
•
Determine how to train operators. For example, training may include information extracted from
section 5 Configuration, section 6 Operation, and section 7 Maintenance.
•
Review the device's PCI Security Policy, posted to the PCI web site
under Approved PIN Transaction Security (PTS) Devices, for additional information about using
the device securely.
DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual
Page 22 of 57 (D998200490-11)
www.pcisecuritystandards.org