Installation; About Inspection; About Host Software - Magtek DynaProx Installation And Operation Manual

4 - Installation

4 Installation
Installing DynaProx products is straightforward: The manufacturer or acquirer configures the preferred
settings, keys, and terminal and payment brand settings before deployment; end users need only set up a
host with appropriate software, configure the software, and connect the device to the host. This section
provides general information about inspecting, connecting, and installing DynaProx products.
4.1

About Inspection

Before unpacking the device, it is important to inspect its secure packaging to make sure it has not been
tampered with in storage or in transit. MagTek provides details for inspecting the integrity of the device's
secure packaging in D998200501 DynaProx / DynaProx BCR Package Inspection.
It is important to thoroughly inspect a new device before deployment, and regularly inspect devices in
live usage (including its immediate surroundings) to make sure malicious individuals have not tampered
with it. MagTek recommends conducting inspection training for all device operators, and an inspection
schedule with checkpoints in place to make sure operators are performing inspections as specified and as
scheduled. MagTek provides an easy-to-follow device inspection reference D998200502 DynaProx /
DynaProx BCR Device Inspection.
4.2

About Host Software

In any solution, DynaProx products are connected to a host, which must have software installed that
knows how to communicate with the device, and which is capable of processing transactions. To set up
the host to work with DynaProx, follow the installation and configuration instructions provided by the
vendor of the host or the host software. For information about developing custom host software, see
section 8 Developing Custom Software.
DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual
Page 24 of 57 (D998200490-11)