Flo CoRe+ MAX Installation Manual page 5

1.2.2. Instructions Pertaining to the Risk of Fire or Electric
Shock
This symbol is used to warn you about hazardous voltage and the possibility of
electric shock.
When using electrical products, basic precautions should always be followed,
including the following. This manual contains important instructions for the
CoRe+ MAX model that must be followed during the installation, operation, and
maintenance of the unit.
This symbol is used to make you aware of important safety information in
these instructions.
1.2.3. Important General Safety Instructions
Always follow the safety instructions below when installing or using the electric vehicle
chargers:
 Children should be supervised around the device while it is in use.
 Never insert your finger into the electric vehicle connection.
 Never use the Electric Vehicle Supply Equipment (EVSE) if the flexible power cord or
Electric Vehicle (EV) cable is frayed, has broken insulation, or shows any other signs
of damage.
 Never use the EVSE if the EV connector enclosure is broken, cracked, open, or shows
any other signs of damage.
 This EVSE was designed to be used with electric vehicles equipped with an SAE-
J1772 connector.
 This EVSE must only be used to charge vehicles that do not require a ventilated
environment during charging.
 Make sure to always disconnect the power supply of the EVSE before servicing it.
 Avoid installing the EVSE in bad weather conditions.