User Maintenance Instructions - Flo CoRe+ MAX Installation Manual

6. User Maintenance Instructions

The CoRe+ MAX enclosure is Type 3R, which is intended for indoor or outdoor use and
provides a degree of protection against corrosion, windblown dust, rain, splashing water,
and hose-directed water. It is designed to remain undamaged by ice, which can form on the
enclosure.
This enclosure type ensures that the maintenance required to protect the integrity of the
charging station enclosure is minimal, except for cleaning, which can be performed with
standard domestic products recommended according to the type of dirt .
When not in use, the charging cable should be properly wound around the holder on the
station enclosure, and the cable connector should be always inserted into its enclosure. Do
not twist, bend, or pull on the cable from the connector alone, either to wind it around the
enclosure or when it is stuck.
When handling the cable, please ensure that the cable's outer insulation and the
connector itself do not show any excessive signs of wear, such as cracks or abrasion. If
there is any damage, please call the Installation or Commissioning Questions number at the
end of this manual for reporting and case management purposes.
7. Moving and Storage
Instructions
The charging station is designed to remain in a fixed position and is not intended to be
portable.
Prior to installation, we recommend that the station be kept in its shipping packaging at
temperatures between -40 °C and 50 °C (-40 °F to 112 °F) and at a humidity level not
exceeding 95% (non-condensing) until it has been installed by qualified personnel.